Embedded Systems Development

Learn general embedded concepts, tools, and techniques using the AMD Vivado™ Design Suite and AMD Vitis™ Unified IDE.The emphasis is on: Designing, expanding, and modifying embedded systems utilizing the features and ...

Ders İçerikleri

Xilinx FPGAs sistem tasarım yeteneklerini yeni bir düzeyde sağlamaktadır, örnek soft MicroBlaze™ processors, hard PowerPC® processors ve silicon-efficient architectural kaynaklar. Bu ders tecrübeli FPGA tasarımcilar hızlı bir şekilde embedded sistemi getirmektedir.

Seviye

Embedded Hardware 3

Kurs süresi

2 Gün

Kimler katılmalı?

Mühendisler: Embedded sistemi Xilinx Microblaze soft prozessor veya IBM PowerPC 440 core ile geliştirmek isteyenlere.

Önşartlar

• FPGA dizayn tecrübesi
• Temel FPGA dizayn Kursunu tamamlamanız lazım veya Xilinx ISE® software implementation tools eşdeğer bilgi
• C programlama temel anlayış
• Bazı HDL modelleme deneyimi

Software Tools

• Xilinx ISE Design Suite: System Edition 11.1
• Mentor Graphics ModelSim simulator

Skills Gained

Bu kapsamlı eğitimini tamamladıktan sonra, hangı bilgiye sahip olacaksınız:

• çeşitli araçları açıklamak Xilinx Embedded Development Kit (EDK)
• Kendi IP EDK çevreye oluşturun ve entegre edin
• Kendi özel peripheralsi Bus Fonksiyonel Modeller ile simule ediniz (BFMs)

Course Outline

1. Gün

• EDK genel bakış
• Base System Builder
• Lab 1: Hardware Base System Builder inşa etme
• Software geliştirmek SDK kullanarak
• Lab 2: Software ekleme ve indirme
• System Buses
• Prozessor temeli
• Interrupts
• Adding Hardware to an Embedded Design
• Lab 3: hardware tasarımı IP ekleme

2. Gün

• Bir İşlemci Sistemine Arayüz
• Kendi Periferik Tasarımı ( IPIC Interface kullanarak )
• Kendi Periferik yükleme ( IPIC Interface kullanarak )
• Lab 4: Embedded System için IP Peripheral– PLB v46 Bus
• Bus Fonksiyonel Model Simülasyonu
• Lab 5: BFM Simulasyonu
• Kendi IPsini Embedded Systeme eklemek
• Lab 6: Özel Çevre birleştirme

Lab Descriptions

Both the MicroBlaze and PowerPC 440 processors are supported in the labs. All labs target the Virtex®-5 FPGA ML507 and Spartan®-3E FPGA boards.

• Lab 1: Hardware Construction with the Base System Builder – Create an XPS project by using the Base System Builder to develop a basic hardware system and generate a series of netlists for the embedded design
• Lab 2: Adding and Downloading Software – Complete the processes begun in Lab 1 by building the software libraries and applications, generating a bitstream file, merging the application into the bitstream, and downloading to the board
• Lab 3: Adding IP to a Hardware Design – Learn to add IP from the many choices in the IP library. Use the GUI to add a general-purpose I/O module and access internal block RAM directly from the MHS file
• Lab 4: Building a Custom IP Peripheral for an Embedded System – Create and add custom IP (IPIC interface) to your design by using the Create or Import Peripheral Wizard
• Lab 5: BFM Simulation – Use the ModelSim simulator to perform Bus Functional Model simulation to verify functionality of the LCD bus peripheral added in the preceding lab
• Lab 6: Integrating a Custom Peripheral – Put it all together: add custom IP to the processor system, then integrate the processor sub-system with other logic in the design